• (1) 1.25" diameter sway bar
• (2) Sway bar arms
• (2) Sway bar mounts that attach directly to the frame
• (2) Factory lower control arm adapter mounts
• (2) Sway bar links with male and female rod ends
• (4) Sway bar link bolts
• (2) Lower control arm pivot reinforcement brackets

A sway bar links the left and right front wheels. When the truck leans in a corner, the bar twists and resists that lean, pushing the outside of the chassis back up and keeping the body level. A bar that resists more holds the truck flatter and makes it react sooner to steering input.

This kit gives the Raptor more side load control and better balance through corners, with a more planted, responsive feel whether you are driving hard off-road or just around town. It is built for a truck still on its factory lower control arms, and it is a practical first step toward a mid travel or long travel front suspension later.

Sway bar and arms

A 1.25" diameter bar with optimized sway bar arms for improved suspension control. The bar mounts attach directly to the frame.

Stock lower arm adapter mounts

The included adapter mounts connect the sway bar links to the factory lower control arms, so no lower arm change is needed to run the bar.

Lower control arm pivot reinforcement

The two pivot reinforcement brackets strengthen the lower arm mounting points. They support the mounts under heavy loads and hard off-road use, and help the alignment stay where it was set after heavy contact.

Select your truck when ordering. The kit is built in four configurations:

• Gen 1 Ford F-150 Raptor, 2010–2014
• Gen 2 Ford F-150 Raptor, 2017–2020
• Gen 3 Ford F-150 Raptor, 2021–2026
• Gen 3 Ford F-150 Raptor R with the V8, 2023–2026

This version is for trucks with the stock lower control arms. If your truck runs Foutz Motorsports fabricated lower arms, you need the fabricated lower arm version of this kit instead.

Will not fit a regular F-150 or a 2WD F-150 frame.

Sway bar kits are handmade in-house in batches and are often out of stock between runs. Contact FMI for the current lead time before you order.

What does a front sway bar kit do?

It improves side load control, reduces body roll and gives the truck a more responsive, balanced feel in corners and off-road.

Does this kit work with the stock lower control arms?

Yes. This version is designed for the factory lower control arms and uses the included adapter mounts to attach to them.

What size is the sway bar?

1.25" in diameter, with optimized sway bar arms.

Does it include sway bar links?

Yes. Two links with male and female rod ends, plus four link bolts.

Which Raptors does it fit?

Gen 1, Gen 2 and Gen 3 F-150 Raptor, plus the Gen 3 Raptor R with the V8. Choose the correct configuration when ordering.

Will it fit a regular F-150?

No. It does not fit a regular F-150 or a 2WD F-150 frame.

Is it a good upgrade for a stock Raptor?

Yes. It is designed as a handling upgrade for a Raptor on its stock lower control arms, and it is a first step toward a mid travel or long travel build.

Is it in stock?

Often not. The kits are handmade in batches, so contact FMI for the current lead time before ordering.