• 1 front windshield panel
• 1 overhead side adapter plate set
• 1 right-to-left panel section
• 2 L-support brackets for the corners
• 1 full hardware kit

Cabin space in a Bronco goes fast once radios, GPS units and recovery or camping gear come along, and loose gear ends up on the seats and floor. The area against the roof is mostly unused.

The Adapt-A-Panel system bolts a steel grid to the factory roof tube structure, so that space becomes a mounting surface. Gear is secured tightly on the move and still within reach when you need it.

Overhead front seat roof mount. The main panel attaches to the side of the stock roof's upper tube structures in the front section and extends across from the driver's side to the passenger side, with a smaller center panel connecting at the middle.

Short front panel. The smaller panel connects to the windshield area above the overhead aux switches and attaches to the front middle section of the longer panel, extending over the center console area below.

• Made from .120" thick mild steel to carry the weight of multiple types of gear and help limit flex across the upper roof tubes once installed
• Grid design with custom Adapt-A-Panel inserts, so accessories bolt on securely and stay easy to reach
• Takes MOLLE-type accessories, a radio, a GPS unit, or camping and hunting gear, laid out the way you want
• Powder coated in a textured hammer black finish so the panels blend into the headliner
• Black stainless hardware for a clean look once installed

Some photos show the roof mount in raw material to show the detail of the panel. The kit ships powder coated.

Product protected by US Patent No. 11,940,092 and US Patent No. 12,276,377.

Fits the 2021 and newer 4-door Ford Bronco, soft top or hard top, all trim packages. No drilling or modifications required.

Is the short front panel included?

Yes. This kit is the across-front panel and the short front panel together.

Does it work with a soft top?

Yes. It works with both soft top and hard top configurations in the 4-door Bronco, all trim packages.

Do I have to drill anything?

No drilling or modifications are required. It attaches to the stock roof's upper tube structures.

What can I mount to it?

MOLLE-type accessories, a radio, a GPS unit, camping or hunting gear, bolted to the grid with the Adapt-A-Panel inserts.

Why do some photos show bare metal?

Some pictures show the roof mount in raw material to show the detail of the panel. It ships powder coated in textured hammer black.