• 2 rear large panels
• 2 front square panels
• 4 bed wall mount cleat brackets
• 2 corner support mounts for the rear tie-down location
• 1 hardware kit: 24 stainless carriage bolts and nuts

Gear that rides loose in the bed slides around, and gear strapped to tie-downs fights for the same few anchor points. A panel system gives every item its own fixed spot on the bed wall.

Grid Inserts are what you mount accessories to, and they can be added any time after the panels are installed. That makes it easy to change your load-out depending on what the trip needs.

The panels give full coverage, even over the cleat area, for the most square feet of mounting surface available.

• Panels made from .135" thick 1018 steel.
• Bed wall mounts made from the same .135" thick steel, precision bent to fit the bed.
• Corner support mounts at the rear tie-down location.
• Stainless carriage bolts and nuts in the hardware kit.

Product protected by US Patent No. 11,940,092 and US Patent No. 12,276,377.

Works in all 2021–2026 Ford F-150 Raptor truck beds and all 2021–2026 Ford F-150 truck beds.

The panels quick-attach to existing hardware locations in the bed with the included hardware kit.

Does this kit cover both sides of the bed?

Yes. It includes two rear large panels and two front square panels, one of each per side.

Which trucks does it fit?

All 2021–2026 Ford F-150 Raptor and F-150 truck beds.

What can I mount to it?

Almost any accessory you want to carry, using Grid Inserts, including heavy items like power tanks and high lift jacks.

Can I add Grid Inserts later?

Yes. Grid Inserts can be added any time after install, so you can change your load-out as needed.

What is it made of?

.135" thick 1018 steel panels and bed wall mounts, with stainless carriage bolts and nuts.