Foutz Motorsports 1.5 inch front leveling kit 2027 Ram 1500 TRX

The 2027 TRX is treated as its own suspension platform, so this kit is engineered around the 2027 model rather than assuming older TRX parts will transfer. The 1.5" collar raises the front of the truck to help create a more level stance while retaining the factory shock and spring setup.

The collar sits under the spring, below the lower spring perch. That matters: it adds preload rather than stacking height on top of the spring, so the leveling hardware stays out of the way of the rest of the front end.

• Provides 1.5" of front lift
• Designed specifically for the 2027 Ram TRX
• Under spring preload collar design
• Retains the factory coil springs
• Retains the factory shocks
• Helps reduce the factory front to rear rake
• CNC machined for precise fitment
• Designed around the 2027 TRX suspension

• Precision machined aluminum
• Manufactured in-house by Foutz Motorsports
• Built specifically for the 2027 TRX
• Available in raw billet aluminum or black anodize

Hardware included:

• (2) Lower coil spring collars for 1.5" of lift
• (2) Rotational indexing posts with hardware

Measuring the front and rear ride height is recommended before ordering, because factory ride height can vary with different spring configurations. Two trucks of the same year do not always sit the same.

Measure both ends, then decide how much you actually need to take out of the rake — that is what tells you whether 1.5" gets you where you want to be.

• 2027 Ram 1500 TRX
• Front suspension
• 1.5" lift
• 2027 specific suspension application

1.5" is the only collar height that works on the 2027 truck. The taller 2" and 2.5" collars sold for the 2021-2024 TRX do not fit it. Ram did not build a TRX for 2025 or 2026, so a part listed for 2021-2024 does not carry forward.

How much lift does the 2027 TRX kit provide?

This kit provides 1.5" of front lift.

Is this the same kit used on the 2021-2024 TRX?

No. The 2027 TRX is treated as a separate platform and this collar is designed specifically around its suspension.

Can I get a 2" or 2.5" collar for my 2027?

No. Collars taller than 1.5" do not work on the 2027 truck. 1.5" is the height offered for it.

Do I need to measure the truck before ordering?

Yes. Measuring the front and rear ride height is recommended because factory ride height can vary with different spring configurations.

Do I keep my factory springs and shocks?

Yes. The collar works with the factory coil springs and factory shocks — nothing else has to come off the truck.

What finishes are available?

Raw billet aluminum or black anodize.