• 1 set (2) of 1/2" spring spacer plates
• 1 set of longer mounting hardware

Rear ride height is set by where the spring sits and how much it is compressed. Add load to the bed or hitch and the spring compresses further, so the rear drops.

A spacer above the spring moves the top of the spring down relative to the body by the thickness of the plate. That adds preload to the rear spring and lifts the body by an even 1/2", using the stock spring and the factory spring bucket.

What it does not do

This kit will not improve wheel travel. Rear travel is limited by the shock, so the spacer adds ride height and spring preload, not travel.

Made from 6061-T6 aluminum and CNC machined for a precise look and fit. The plates install above the stock spring in the stock spring bucket, using the longer mounting hardware in the kit.

Fits the 2021–2026 Gen 3 Ford F-150 Raptor, rear suspension, with the stock rear spring.

Do not stack multiple kits to get more height. One kit per truck.

The plates install above the stock spring in the stock spring bucket. Longer mounting hardware is included.

How much lift does it add?

About 1/2" at the rear of the truck.

Will it give me more wheel travel?

No. Wheel travel is limited by the shock. The kit adds ride height and preload to the rear spring.

Can I stack two kits for 1"?

No. Multiple kits cannot be stacked to get more height.

Do I keep my stock springs?

Yes. The plates go above the stock spring in the stock spring bucket.

Will it help with a loaded-down rear?

Yes. If the rear sits low from carrying weight, the spacer helps bring the ride height back up.