Description
An adjustable rear panhard bar for the 2021 and newer Ford Bronco, with an FK 1" rod end on the adjustable side and an FK 1" uniball on the fixed side. Built from 1.5" diameter chromoly tube with 17-4 stainless steel mounting hardware.
Change the ride height and the factory fixed-length panhard bar pulls the rear axle off center. This bar adjusts in length so you can re-center the axle.
What Is In The Kit
- 1 fabricated panhard bar
- 2 17-4 stainless spacers for the frame side
- 2 17-4 stainless spacers for the axle side
- 1 FK rod end, 1" ball and 1" thread
- 1 1" jam nut
- 1 FK 1" uniball and ring clip
Why Adjustable
The panhard bar is what holds the rear axle centered side to side. It pivots at the frame and at the axle, so when ride height changes the bar swings through a different arc and drags the axle toward one side. A fixed bar cannot correct that.
With a threaded rod end on one end, this bar can be lengthened or shortened to put the axle back in the center after a ride height change.
How It Is Built
- 1.5" diameter chromoly tube
- FK 1" rod end on the adjustable side, FK 1" uniball on the fixed side
- MIG welded and powder coated in a textured black finish
- Mounting hardware made from 17-4 stainless steel
Fitment
Fits the 2021 and newer Ford Bronco rear suspension.
Questions
Do I need an adjustable panhard bar?
If you have changed your Bronco's ride height, the axle will no longer sit centered on the factory bar. This kit lets you re-center it.
Which end adjusts?
The FK 1" rod end side adjusts, locked with the 1" jam nut. The other end is a fixed FK 1" uniball.
Is a panhard bar the same as a track bar?
Yes. Same part, two names. It locates the rear axle side to side.