• 1 right side bypass shock mount
• 1 left side bypass shock mount

The shock is not included.

Adding a secondary bypass shock puts new load into the front of the truck. This tower gives that shock a dedicated mount and ties it into the factory coil bucket, reinforcing the top of the bucket instead of hanging extra load off it.

The tower upright also supports the back side of the upper arm bolt, which strengthens that bolt as well.

The mounts are fabricated and MIG welded for strength and durability.

The tower is designed to work with a custom-made shock that is part of the Foutz Motorsports mid and long travel kits, and it works with the Foutz Motorsports TRX fabricated lower control arm.

Fits the 2021, 2022, 2023 and 2024 Ram TRX with a Foutz Motorsports TRX front suspension kit.

This tower requires a special custom-layout bypass shock. Ask your FMI sales rep for information on the correct shock before ordering.

• Welding to the frame is required.
• Installation should be performed by a qualified welder or fabricator.

Is the shock included?

No. The kit is the right and left mounts only.

Can I use an off-the-shelf bypass shock?

No. The tower requires a special custom-layout bypass shock. Ask your Foutz Motorsports representative for help ordering the correct shock for this front kit.

Do I need one of your front kits?

Yes. It is an add-on to the TRX Mid Travel Front Suspension kit, and you need it with any of our TRX kits to mount the secondary bypass shock. It works with the Foutz Motorsports fabricated lower control arm.

Is it bolt-on?

No. Welding to the frame is required, and installation should be done by a qualified welder or fabricator.