Foutz Motorsports Billet Upper Control Arm Kit - stock length 2021-2024 Ram 1500 TRX

• Tighter handling. Rod ends replace the rubber bushings at the frame side of the arm, so the front end feels tighter and more predictable.
• Adjustable caster and camber. The 7/8" FK rod ends at the frame let your alignment shop dial in the front end, including after a leveling kit.
• Serviceable. When the 1.25" uniball or 7/8" rod ends wear, replace just those parts instead of the entire arm, the way you would with stock arms.
• Direct bolt-on. Works with your stock spindle.

• Billet aluminum upper control arms, CNC machined in Mesa, Arizona
• 7/8" FK rod ends at the frame, adjustable for caster and camber
• Heavy-duty 1.25" FK uniball at the spindle
• Uniball and rod end spacers machined in-house from 17-4 stainless steel
• FMI billet bearing caps

Raw billet aluminum, or anodized FOX Orange, Black or Blue.

This kit fits the 2021, 2022, 2023 and 2024 Ram 1500 TRX.

• 2027 Ram SRT TRX: use the 2027 Ram TRX billet upper control arm kit.
• 2025+ Ram 1500 RHO: use the Ram RHO billet upper control arm kit.
• Prefer a fabricated arm? See the 2021-2024 Ram TRX fabricated upper arm kit.

• (1) right and (1) left billet aluminum upper control arm
• 7/8" FK rod ends with 17-4 stainless steel spacers
• 1.25" FK uniballs with 17-4 stainless steel spacers
• (2) FMI billet bearing caps
• (1) right and (1) left wheel position sensor mount plate
• Complete hardware kit

Do I need upper control arms on a leveled Ram TRX?

Adjustable upper control arms let your alignment shop set caster and camber after the truck is leveled, and they replace the rubber frame bushings with rod ends. Pair them with a TRX front leveling kit or run them at stock height.

Are these TRX upper control arms bolt-on?

Yes. They are a direct bolt-on upgrade that works with the stock spindle. Have the front end aligned after installation.

What ball joint do these arms use?

A 1.25" FK uniball at the spindle and 7/8" FK rod ends at the frame, all with 17-4 stainless steel spacers.

Can I replace the uniball or rod ends later?

Yes. The uniball and rod ends are replaceable, so you service the wear parts instead of replacing the whole arm.

Do these fit the 2027 TRX or the Ram RHO?

No. This kit is for the 2021-2024 TRX. The 2027 TRX and the RHO each have their own kit, linked under Fitment above.

• Ram TRX billet tie rod kit
• Front bump stop and limit strap kit
• Leveling kits: 1.5", 2" and 2.5"