• Designed to weld directly onto the stock lower control arm mounts
• Protects the mounts on the factory lower control arms from bending, cracking, and trail damage
• Enhances structural strength at a common high-stress point on the front suspension
• Made from .190" thick steel, precision laser-cut in-house for an exact fit
• Engineered to sit flush with the complete outer surface of the stock lower arm mount plates
• 2 drain holes in the base let water escape and help prevent corrosion
• Compatible with our Slot Delete Insert kits

• Full-surface fitment — Designed to fit as close as possible to the complete outer surface of the stock lower arm mount plates
• Edge-to-edge coverage — Extends to the outer edges of the plate, not just the surface
• Two-point weld attachment — Welds attach to both the stock base plate and the upper edge of the frame, strengthening the whole assembly
• Over 1/4" combined thickness — Added material + stock plates reinforce the mounting area on each side

• Top cross plate — Prevents the pocket from folding in and adds weld area at the point where cracks most commonly start and tear off the frame
• Pocket plates — Extends to the outer edges of the stock mount so welds attach to both the base plate and the upper edge of the frame, strengthening the whole assembly
• Bottom cap plate — Supports the width of the mount and keeps the side plates from folding in at the stock lower arm pivot area
• Drain holes — Integrated into each gusset to prevent water buildup

• .190" precision-cut steel — Reinforces a common high-stress area of the front suspension against off-road damage

• Fits 2017–2020 Gen 2 Ford Raptor
• Fits 2021–2026 Gen 3 Ford Raptor
• Works for 2017–2026 F-150 Raptors
• Direct weld-on install — Designed to weld straight onto the factory mounts
• Slot Delete compatible — Fully compatible with the Foutz Lower Arm Slot Delete Insert Kit

Requires welding by a qualified welder. Not intended for DIY installation without proper welding equipment and experience.